Plug-n-Play LTE

Plug-n-Play LTE

1COM offers LTE Plug-n-Play 4G/LTE wireless solutions with Drop-n-Go Deployment. As simple as WiFi with LTE security.

Patented architecture and innovative award winning Virtualized EPC Technology. Each 1COM LTE deployment includes integrated EPC and IMS core within each eNodeB delivering ‘Coreless LTE’

This breakthrough technology enables simple Drop-n-Go deployments. 1COM’s LTE rugged, self-enclosed compact design is well suited for private indoor or outdoor LTE usage.

1COM’s LTE Plug-n-Play can be interconnected with a simple IP connection to form a homogeneous meshed IP-network spanning dozens to hundreds of sites.

• LTE Plug-n-Play” deployment as simple as Wi-Fi but with added LTE security, quality of service, and performance
• LTE is behind your firewall, running on your existing network
• Lowest cost per GB accelerates OPEX savings via distributed virtualized EPC
• Rugged compact design enclosures for indoor or outdoor usage
• 1COM LTE is available on 3.65GHz
• 1COM LTE enables affordable connectivity

Data Throughput
Overall per sector throughput per carrier
LTE Speeds @ 20 MHz 110Mbps DL/70Mbps UL
LTE Speeds @ 10 MHz 90Mbps DL/50Mbps UL
LTE Speeds @ 5 MHz 55Mbps DL/30Mbps UL
HSPDA 3.5G per sector – 10-12 Mbps throughput with voice and SMS.
The data throughput also dependent on modem/handset device category. Higher category devices obtain higher speeds.
LTE Radio License
Radio licenses on FDD radios are required.
Radio Licenses are not required on TDD.

Working Frequency: 3650MHz-3700MHz
Working Bandwidth: 5MHZ/10MHZ/15MHZ/20MHZ
Capacity: Peak rate: 90Mbps DL/40Mbps UL@20MHz; 96 (2W) active users; Single 1G Base T Ethernet Connection
Mobility: ≤ 20Km/h
Output Power (TOC) Up to 2W (2 x 1W)
Receiver Sensitivity: -105dBm
Synchronization Mode: GPS, IEEE1588

Weight (DC) < 4 kg Dimension (H x W x L) 120mm (H) x 310mm (W) x 400mm (L) Power Input 100-277 vAC, 50/60Hz, 2.3A max DC48V, 0-4.17A Power Dissipation 500mw power out Temperature Outdoor -20oC to +55oC Relative Humidity 5% to 95% Waterproof/Dust proof IP65 (IP67 Optional) Heat Dissipation Natural Cooling MTTR 1 Hour Availability 99.999714% Downtime Duration < 1.481min/year MTBF > 350,000 hours

For more information:


Plug-n-Play LTE

Huawei RRU3959 02311BPE 900MHz for sale

Huawei RRU3959 02311BPE 900MHz D5MJRUAC8C0-KUNLUN-900 NEW in BOX 200pcs in STOCK
200+ units in Stock NEW in BOX with TWO YEAR WARRANTY
RRU3959 X930-955MHz/RX885-910MHz,-48VDC,9.8G,2T2R,2*60W 02311BPE
Huawei RRU3959 02311BPE

Huawei RRU3959 02311BPE NEW
Huawei RRU3959 02311BPE NEW

Huawei RRU 2100MHz 2.1GHz Band 1 UMTS RRU/RRH for sale

Huawei RRU 2100MHz 2.1GHz Band 1 UMTS RRU/RRH
Huawei RRU 2100MHz 2.1GHz Band 1
RRU3839 2100MHz UMTS 2T2R RRU3839
RRU3838 2100MHz UMTS 2T2R RRU3838
RRU3832 2100MHz UMTS 2T4R RRU3832
RRU3829 2100Mhz UMTS 2T2R RRU3829
RRU3828 2100MHz UMTS 2T2R RRU3828
RRU3826 2100Mhz UMTS 1T2R RRU3826
RRU3824 2100Mhz UMTS 1T2R RRU3824
RRU3808 2100Mhz UMTS 2T2R RRU3808
RRU3806 2100Mhz UMTS 1T2R RRU3806
RRU3804 2100Mhz UMTS 1T2R RRU3804
RRU3853 2100MHz UMTS 2T4R
RRU3959-a 2100MHz UMTS LTE UL 2T2R
RRU3959 2100MHz UMTS LTE UL 2T2R
RRU3958 2100MHz UMTS LTE UL 2T2R
RRU3953 2100MHz UMTS LTE UL 2T4R
RRU3952m 2100Mhz UMTS LTE UL 2T4R
RRU3952 2100MHz UMTS LTE UL 2T4R
RRU3959 2100MHz UMTS LTE UL 2T2R
RRU5909s 2100MHz UMTS LTE UL 2T2R
RRU5909 2100MHz UMTS LTE UL 2T2R
RRU5508 2100MHz UMTS LTE UL 2T4R
RRU5507 2100MHz UMTS LTE UL 2T4R
RRU5502 2100MHz UMTS LTE UL 4T4R
RRU5501 2100MHz UMTS LTE UL 4T4R
RRU5501 2100MHz 4T4R UMTS LTE UL
RRU5507 2100MHz 2T4R UMTS LTE UL
RRU5502 2100MHz 4T4R UMTS LTE UL
RRU5909 2100MHz 2T2R UMTS LTE UL
Huawei RRU 2100MHz 2.1GHz Band 1 UMTS RRH

Huawei B2368 4G LTE CPE User Manual Datasheet

Huawei B2368-66 4G LTE CPE B2368 User Manual Datasheet
Huawei B2368-66 LTE wireless gateway supports latest LTE Category DL-12 and UL-13, achieves peak download speed to 600MBps in DL, and 150MBps in UL. Up to 64 wireless devices can be connected simultaneously to Huawei B2368. 3 Ethernet ports and one RJ11 for ATA VOIP


Form: Outdoor Unit + Indoor Unit
Chip platform: HiSilicon Balong750
Category: DL Cat.12 / UL Cat13
Peak Rate: DL 600Mbps, UL 150Mbps
Supports a maximum throughput of 420 Mbit/s in the downlink and 30 Mbit/s in the uplink when TDD subframe configuration 2 is used.
Supports a maximum throughput of 584 Mbit/s in the downlink and 150 Mbit/s in the uplink for FDD.
Protocol Version: LTE 3GPP Release 12
Operating Frequency B38/B40/B41/B42/B43/B1/B3/B7/B8/B20
Band 38: 2570–2620 MHz
Band 40: 2300–2400 MHz
Band 41: 2496–2690 MHz
Band 42: 3400–3600 MHz
Band 43: 3600–3800 MHz(In Canada market, not support 3650~3700MHz)
Band 1: 1920–1980 MHz in the uplink and 2110–2170 MHz in the downlink
Band 3: 1710–1785 MHz in the uplink and 1805–1880 MHz in the downlink
Band 7: 2500–2570 MHz in the uplink and 2620–2690 MHz in the downlink
Band 8: 880–915 MHz in the uplink and 925–960 MHz in the downlink
Band 20: 832–862 MHz in the uplink and 791–821 MHz
Carrier Aggregation 2CC CA
Modulation 64QAM
Channel Bandwidth: FDD: 5MHz, 10MHz, 15MHz, 20MHz
TDD: 10MHz, 15MHz, 20MHz
TX Power: Band1: 3~4dBi
Band3: 4~5dBi
Band7/ Band38/Band40/Band41 : 6~7dBi
Band8/Band20: 0~2dBi
Band42/Band43: 8~9dBi
Input impedance: 50 OHM
Antenna: LTE antenna:
800-900MHz: 0 dBi
1710–2170 MHz: 6–7 dBi
2300–2690 MHz: 7–8 dBi
3400–3800 MHz: 8–9 dBi
MIMO: TDD DL 4x4MIMO + 2CC CA (contiguous or non-contiguous)
FDD DL 4x4MIMO (B3/7)+ 2CC CA (contiguous or non-contiguous)
FDD DL 2x2MIMO (B1/8/20) + 2CC CA (contiguous or non-contiguous)
FDD (4x4MIMO) (B3)+ TDD (4x4MIMO) 2CC CA
FDD (2x2MIMO) (B1/8/20) + TDD (4x4MIMO) 2CC CA
1)TDD ONLY: Support TM 2,3,4,7,8,9 (CRS config 2port) or TM 3, 4 (CRS config 4port)
2)FDD+TDD: TDD support TM 2,3,4,9(CRS config 2port)
LTE FDD MIMO: TM2,3,4; Uplink 64QAM
LTE Transmission Mode:
Support: Windows 7, Windows 8, Windows 10, Linux, and Mac. Be compatible with browsers including Internet Explorer, Firefox, Chrome, and Safari.
Windows 10, Windows 8.1, Windows 8, Windows 7,
Mac OS X 10.9, 10.8, and 10.7 with latest upgrades
Interface Indoor Unit:
3 Ethernet interface (RJ45) ; 10/100/1000 Mbps
1 Giga PSU(Power Supply Unit) WAN port (RJ45) ; 10/100/1000 Mbps
1 POTS interface (RJ11) (ONLY VOIP)
1 Power button
1 Reset button
1 WPS button
1 DC IN interface
Outdoor Unit:
1 Giga PSU LAN port (RJ45) ; 10/100/1000 Mbps
1 USIM card slot(3FF)
CS Voice: No (ONLY VOIP)
Voice VoIP: Voice over IP (VoIP)*
Supports high-quality voice services over the telephony interface in compliance with the Simple Internet Protocol (SIP).
Supports one line of voice and connection to another integrated access device (IAD) to obtain more voice ports. -Supports multiple APNs, with one APN for VoIP. * This feature need to be IOT
Supports G.729, G.711a-law, and G.711u-law Code.
Supports SIP (RFC3261).
Supports SDP (RFC2327).
Supports RTP/RTCP (RFC1889/RFC1890).
Supports G.168 (echo cancellation).
Supports the following phone features:
Caller ID generation
Call waiting
Call transfer
Call forwarding (unconditional, busy, and no answer forwarding)
Call hold
Three-way conference
Do not disturb
Terminal Management: TR069&SNMPv3(SNMPv3 need customization based device management
Supports the CPE WAN Management Protocol (CWMP) as specified in Broadband Forum TR-069&SNMPv3 Amendment II.
Supports remote software image installation, with a set of configuration and status parameters.
Wi-Fi: WLAN: IEEE 802.11ac/b/g/n, 2.4GHz & 5GHz
Wi-Fi Encryption: 64-/128-bit WEP, WPA, WPA2
Dimensions ODU:275mm(H) *125mm(D)
IDU: 166 mm(L) X 124 mm(W) X 50mm(H)
Weight Outdoor Unit: < 1.5kg Indoor Unit: ~290g Temperature ODU: Working temperature: With solar radiation of 1120 W/m2: -40°C to +45°C Without solar radiation: -40°C to +50°C Storage temperature: -40 °C to +70°C IDU:
Working temperature: -5 °C to +40 °C
Storage temperature: –40 °C to +70 °C
Humidity: 5% to 95%
Environmental rating: IP65 for ODU
AC/DC power supply: AC: 100V–240V, 50/60 Hz
DC: 12V/2A
Power consumption: Average power consumption at peak: <24 W
Average power consumption while Wi-Fi disable: <22W
VPN Supports L2/L3 VPN client.
VPN throughput: <30Mbps(DL+UL)
Certification/ Compliance CE certification
IEC/EN60950-1 Wireless Safety
IEC/EN60950-22 Environmental
CE Class B
Huawei B2368-66

Macro-Rapid Connect LTE + Cellular-On-Wheels “COW’

Macro-Rapid Connect LTE + Cellular-On-Wheels “COW’

Rapid Connect LTE is a Macro based 4G/LTE patented distributed mobile wireless network architecture solution.

• Compact enough to be deployed in vehicles

The LTE Rapid Connect virtualizes the EPC and IMS core at each eNodeB. This places the mobility anchor at the wireless mobile broadband network’s edge eliminating the need for data to traverse to a centralized core via tunneling.

LTE Rapid Connect provides up to 80 watts of power and 20 MHz bandwidth of LTE spectrum for extended coverage and fast data speeds.

Key Benefits:
• LTE Macro is a mobile LTE solution for vehicles at speeds up to 120 KM/Hour
• Embedded LTE-Over-Satellite™ eliminates latency issues and enables higher-throughput
• Enablement of LTE mobility anchors at the wireless mobile broadband network’s edge
• OPEX elimination of the need for data to traverse to a centralized core via tunneling
• High power transmitters, up to 80 watts
• Broad frequency range of 20 MHz bandwidth delivering fast LTE data speeds

Key Features
• 4G LTE Software
• Virtualized EPC and IMS Core
• Fixed, Nomadic and Mobile
• Expanded Bandwidth, Coverage and Capacity
• High Speed Data and Video Streaming
• Broad variety of LTE UE Subscriber Units
• 3GPP Compliant LTE Air Interface
• Integrated eNodeB Radio
• Embedded PCRF Rate Provisioning
• In-Band Mesh Networking
• Multi-Media Broadcast Services (MBMS) Simplified Web GUI System Administration
• High Data Speeds, up to 150 Mbps Indoor/Outdoor Mounting with Extended Ranges Cellular-On-Wheels ‘COW’
• LTE-Over-Satellite™

For more information:

1COM Macro-Rapid Connect LTE + Cellular-On-Wheels “COW’ solution